How To Apply Vinyl Graphics

Vinyl graphics should always be applied at 60-85° Fahrenheit, out of direct sunlight. Clean the surface of the substrate with a mild detergent or Windex, and remove any dirt, oil, or wax. Dry completely with a lint free cloth. If you are applying a large graphic for the first time, you will want to recruit a second pair of hands to help you.

Applying An Image

Step 1

Position the graphic in the desired location. Hold there with small pieces of masking tape. Use a ruler to aid in positioning the graphic. Then step back, and eyeball the result. Adjust the position of the graphic on the substrate as necessary. Add a piece of masking tape along the chosen edge to act as a "hinge" and to hold the whole graphic more firmly.

Step 2

Lift the graphic and slowly peel the paper backing.

Step 3

Hold the edge of the graphic away from the substrate. Starting at the middle of the graphic, begin to squeegee the graphic onto the substrate. Work your way from the middle of the graphic to the outer edge, using firm strokes up and down.

Step 4

Starting at the corner remove the mask, pulling gently down and back. If the graphic wants to come up with the mask, lay it back down, rub firmly over area and proceed with mask removal.